Resources

Showing 1-10 of 22

EELS Quantification: Using Concurrent Standards

Media Video
EELS Quantification: Using Internal Standards

Media Video
Direct detection electron energy-loss spectroscopy: A method to push the limits of resolution and sensitivity

Publication

Nature Scientific Reports

Hart, J. L.; Lang, A. C.; Leff, A. C.; Longo, P.; Trevor, C.; Twesten, R. D.; Taheri, M. L.

In many cases, electron counting with direct detection sensors offers improved resolution, lower noise, and higher pixel density compared to conventional, indirect detection sensors for electron microscopy applications.
Atomic-scale quantitative analysis of lattice distortions at interfaces of two-dimensionally Sr-doped La2CuO4 superlattices

Publication

Applied Materials & Interfaces

Wang, Y.; Baiutti, F.; Gregori, G.; Cristiani, G.; Salzberger, U.; Logvenov, G.; Maier, J.; van Aken, P. A.

Using spherical aberration corrected high-resolution and analytical scanning transmission electron microscopy, we have quantitatively studied the lattice distortion and the redistribution of charges in two-dimensionally strontium (Sr)-doped La2CuO4 superlattices, in which single LaO planes are pe
The role of intergranular chromium carbides on intergranular oxidation of nickel based alloys in pressurized water reactors primary water

Publication

EMAS 2015 Workshop

Gaslain, F. O. M.; Le, H. T.; Duhamel, C.; Guerre, C.; Laghoutaris, P.

Alloy 600 is used in pressurized water reactors (PWRs) but is susceptible to primary water stress corrosion cracking (PWSCC). Intergranular chromium carbides have been found beneficial to reduce PWSCC.
Heterogeneous diamond phases in compressed graphite studied by electron energy-loss spectroscopy

Publication

Diamond and Related Materials

Sato, Y.; Bugnet, M.; Terauchi, M.; Botton, G. A.; Yoshiasa, A.

Chemical mapping imaged by electron energy-loss spectroscopy based on scanning transmission electron microscopy was conducted on a compressed graphite specimen containing different carbon allotropes (hexagonal diamond, cubic diamond, and graphite phases).
Fundamentals of electron energy-loss spectroscopy

Publication

EMAS 2015 Workshop

Hofer, F.; Schmidt, F. P.; Grogger W.; Kothleitner, G.

Electron energy-loss spectroscopy (EELS) is an analytical technique that is based on inelastic scattering of fast electrons in a thin specimen. In a transmission electron microscope (TEM) it can provide structural and chemical information about a specimen, even down to atomic resolution.
Energy-Filtering Transmission Electron Microscopy

Book

Reimer, L. (Ed.)

Energy-filtering transmission electron microscopy (EFTEM) presents a summary of the electron optics, the electron-specimen interactions, and the operation and contrast modes of this new field of analytical electron microscopy.
Resonances of nanoparticles with poor plasmonic metal tips

Publication

Scientific Reports

Ringe, E.; DeSantis, C. J.; Collins, S. M.; Duchamp, M.; Dunin-Borkowski, R. E.; Skrabalak, S. E.; Midgley, P. A.

The catalytic and optical properties of metal nanoparticles can be combined to create platforms for light-driven chemical energy storage and enhanced in-situ reaction monitoring. However, the heavily damped plasmon resonances of many catalytically active metals (e.g.
Contact-induced nucleation in high-performance bottom-contact organic thin film transistors manufactured by large-area compatible solution processing

Publication

Advanced Functional Materials

Niazi, M. R.; Li, R.; Abdelsamie, M.; Zhao, K.; Anjum, D. H.; Payne, M. M.; Anthony, J.; Smilgies, D. -M.; Amassian, A.;

Scalable manufacturing of small-molecule organic thin film transistors (OTFTs) with performance approaching single crystals requires extraordinary control over microstructures and morphologies of organic semiconductors (OSCs).

Search form

Resources

Pages