Resources

Showing 61-70 of 144

Simultaneous in-situ synthesis and characterization of Co@Cu core-shell nanoparticle arrays

Publication

Advanced Materials

McKeown, J. T.; Wu, Y.; Fowlkes, J. D.; Rack, P. D.; Campbell, G. H.

Core-shell particle ensembles are fabricated by pulsed-laser-induced dewetting of initially continuous, ultrathin alloy films through a combination of morphological and chemical instability.
Synthesis of chiral, crystalline Au-nanoflower catalyst As-sisting conversion of rhodamine-B to rhodamine-110 and a single step, one pot, eco-friendly reduction of nitroarenes

Publication

Journal of Physical Chemistry

Basak, S.

Chiral, multipetal gold nanoflowers (AuNFs) with crystalline tips were synthesized in high yield through the reduction of HAuCl4 in water in presence of preformed core-satellite Ag nanoparticle (AgNPs) seeds.
Continuous-mode laser ablation at the solid-liquid interface of pelletized low-cost materials for the production of luminescent silicon carbide nanocrystals

Publication

Journal of Physical Chemistry

Hueso, J. L.

We report on the fabrication of silicon carbide (SiC) nanocrystals using a continuous scanning mode laser for the ablation of pelletized SiC microparticles (NPs).
Investigation of ion induced bending mechanism for nanostructures

Publication

Materials Research Express

Rajput, N. S.; Tong, Z.; Luo, X.

Ion induced bending is a promising controlled technique for manipulating nanoscale structures. However, the underlying mechanism of the process is not well understood. In this letter, we report a detailed study of the bending mechanism of Si nanowires (NWs) under Ga+ irradiation.
The effect of surface conditions on the elevated temperature sliding contact deformation of AA5083 alloy

Publication

Wear

Gali, O. A.; Riahi, A. R.; Alpas, A. T.

Elevated temperature sliding contact experiments were carried out on an Al-Mg alloy AA5083 to study the formation of oxide fibres on their surface. Deformation and friction tests were conducted at a constant strain rate of 4×10−2 s−1 at temperatures 350 °C, 450 °C and 545 °C.
Intumescing multilayer thin film deposited on clay-based nanobrick wall to produce self-extinguishing flame retardant polyurethane

Publication

Journal of Materials Science

Holder, K. M.; Huff, M. E.; Cosio, M. N.; Grunlan, J. C.

Significant loss of life and property results each year from fires fueled by polyurethane found in household furnishings. Established layer-by-layer flame retardant systems were combined to produce a stacked nanocoating for flame retarding polyurethane foam.
Synthesis and catalytic activity of crown jewel-structured (IrPd)/Au trimetallic nanoclusters

Publication

Advanced Materials

Zhang, H.; Lu, L.; Kawashima, K.; Okumura, M.; Haruta, M.; Toshima, N.

Crown jewel-structured (IrPd)/Au trimetallic nanoclusters are prepared by galvanic replacement reaction using Ir/Pd nanoclusters with a structure of Ir rich in core and Pd rich in shell as mother clusters.
Direct measurement of the low temperature spin state transitions in La1−xSrxCoO3 (0.05 < x < 0.3)

Publication

Journal of Applied Physics

Gulec, A.; Klie, R. F.

Sr-doped LaCoO3 has a complex magnetic phase diagram, which is believed to be directly correlated to changes in the crystal structure and ordering of the Co3+ spin states.
Ellipsometric and electron spectroscopic study of degradation of optical properties in Mo mirror irradiated with deuterium and/or helium ions

Publication

Journal of Nuclear Materials

Ono, K.; Miyamoto, M.; Hasuike, S.; Nakano, T.; Kurata, H.

Degradation of optical properties in Mo mirrors irradiated with helium and/or deuterium ions has been studied by ellipsometric spectroscopy, electron energy loss spectroscopy, and electron microscopy.
Interface-induced nonswitchable domains in ferroelectric thin films

Publication

Nature Communications

Han, M-G.; Marshall, M. S. J.; Wu, L.; Schofield, M. A.; Aoki, T.; Twesten, R.; Hoffman, J.; Walker, F. J.; Ahn, C. H.; Zhu, Y.

Engineering domains in ferroelectric thin films is crucial for realizing technological applications including non-volatile data storage and solar energy harvesting. Size and shape of domains strongly depend on the electrical and mechanical boundary conditions.

Search form

Resources

Pages